Running both Win98SE and WinXP Pro on the same system.
CPU: Pentium 4 2Ghz - 512mb ram (PC800)
Motherboard: Asus P4T
Video: Asus V8200 Ti200 (GeForce3)
I do video Capturing and Editing with Adobe Premiere 6.01. I don't use Asus digitalVCR nor Asus Live.
I'll try to be as clear as possible so forgive me if it may seem long, but thank you very mutch for trying to help.
Like many others, I noticed that after installing the Asus Capture Drivers v 1.04g and rebooting, only Win98SE detected the new hardware, while WinXP didn't detect a thing. After reading a couple of threads here, I downloaded the NVidia Capture drivers, installed v1.19 and after rebooting, WinXP detected and installed the new hardware. Everything seemed ok, or so I thought.
I couldn't wait to use WinXP for capturing some sequences but when comes the time for the capture driver setup under Adobe Premiere, the only option I get is YUVY, where in Win98 I can choose from YUVY, Asus 2.0, 24 bits RGB, etc... The problem with YUVY is that capturing at 320x240 takes up a huge 250Mb for 1 minute!!!! When I use the Asus compression (only available in Win98) it's about 50 Mb for 1 minute.
I also noticed that the dialogs are not the same in Win98 and WinXP. I'm talking here about the dialogs when setting up the VFW (video for windows) options in Premiere.
So, the nVidia drivers might have a higher version number (1.08 - 1.19), but to me they are less efficient than the Asus ones (1.04g).
I tried installing the Asus Codecs but there is still only YUVY to choose in the VFW setup dialog under Premiere. Although, since I installed the Asus Codecs, of course I can now read the files I captured in Win98 with the "Asus 2.0" selection in VFW settings.
So right now I have to capture in Win98, and switch to XP for editing, otherwise, it's 250Mb/min.
When I look at the video Codecs in Win98, I have 3 lines about Asus, but in WinXP I only have 2, but this is the way the Codec installation .inf file is made.
At last, my question, and if you're still with me you probably guessed it, how can I get to capture with the Asus 2.0 codec under WinXP. In other words, how can I get the same choices that I have in Win98, when I get to the VFW setup dialog under Premiere 6.x.
I hope I was clear and not boring. Forgive my english, as I'm french, and thank you for your time and attention...
SylS
CPU: Pentium 4 2Ghz - 512mb ram (PC800)
Motherboard: Asus P4T
Video: Asus V8200 Ti200 (GeForce3)
I do video Capturing and Editing with Adobe Premiere 6.01. I don't use Asus digitalVCR nor Asus Live.
I'll try to be as clear as possible so forgive me if it may seem long, but thank you very mutch for trying to help.
Like many others, I noticed that after installing the Asus Capture Drivers v 1.04g and rebooting, only Win98SE detected the new hardware, while WinXP didn't detect a thing. After reading a couple of threads here, I downloaded the NVidia Capture drivers, installed v1.19 and after rebooting, WinXP detected and installed the new hardware. Everything seemed ok, or so I thought.
I couldn't wait to use WinXP for capturing some sequences but when comes the time for the capture driver setup under Adobe Premiere, the only option I get is YUVY, where in Win98 I can choose from YUVY, Asus 2.0, 24 bits RGB, etc... The problem with YUVY is that capturing at 320x240 takes up a huge 250Mb for 1 minute!!!! When I use the Asus compression (only available in Win98) it's about 50 Mb for 1 minute.
I also noticed that the dialogs are not the same in Win98 and WinXP. I'm talking here about the dialogs when setting up the VFW (video for windows) options in Premiere.
So, the nVidia drivers might have a higher version number (1.08 - 1.19), but to me they are less efficient than the Asus ones (1.04g).
I tried installing the Asus Codecs but there is still only YUVY to choose in the VFW setup dialog under Premiere. Although, since I installed the Asus Codecs, of course I can now read the files I captured in Win98 with the "Asus 2.0" selection in VFW settings.
So right now I have to capture in Win98, and switch to XP for editing, otherwise, it's 250Mb/min.
When I look at the video Codecs in Win98, I have 3 lines about Asus, but in WinXP I only have 2, but this is the way the Codec installation .inf file is made.
At last, my question, and if you're still with me you probably guessed it, how can I get to capture with the Asus 2.0 codec under WinXP. In other words, how can I get the same choices that I have in Win98, when I get to the VFW setup dialog under Premiere 6.x.
I hope I was clear and not boring. Forgive my english, as I'm french, and thank you for your time and attention...
SylS