metamorphosis
Programmer
Hi there-
first thing is:
if I start up Digital Vcr in PALBGH mode, the picture goes slightly blocky, vertically. Mainly noticable when viewing something with a solid outline (the outline goes jagged). Starting up on NTSC M and then switching to PALBGH removes this problem, but with the annoyance of having to change it everytime.
second thing is:
Digital VCR does not appear to remember it's brightness, saturation, contrast and hue settings. Is this just me or are others experiencing this?
My setup:
celeron 950mhz
128mb ram
Asus v7700 deluxe
Asus 19.80 drivers
Nvidia WDM 1.16 driver (the asus wdm isn't quite as nice)
Thanks,
Matt
first thing is:
if I start up Digital Vcr in PALBGH mode, the picture goes slightly blocky, vertically. Mainly noticable when viewing something with a solid outline (the outline goes jagged). Starting up on NTSC M and then switching to PALBGH removes this problem, but with the annoyance of having to change it everytime.
second thing is:
Digital VCR does not appear to remember it's brightness, saturation, contrast and hue settings. Is this just me or are others experiencing this?
My setup:
celeron 950mhz
128mb ram
Asus v7700 deluxe
Asus 19.80 drivers
Nvidia WDM 1.16 driver (the asus wdm isn't quite as nice)
Thanks,
Matt