I have setup an Asterisk version 13 system to a 3CX system (similar to the below guide) - it registers fine:
The issue I have now is the routing of calls of which I am sure the dialplan is the answer.
If I call from 3CX to the bridge (Asterisk ext 6001) it gives me a log error of:
Normal call termination. Call originator: Extn:303. Reason: No answer
I have run a PCAP trace and NGREP on the Asterisk end and although registered it receives nothing from the bridge.
Can someone offer any assistance on what needs configuring on Asterisk (extensions.conf) to receive and make calls via the bridge.
Thanks in advance.
The issue I have now is the routing of calls of which I am sure the dialplan is the answer.
If I call from 3CX to the bridge (Asterisk ext 6001) it gives me a log error of:
Normal call termination. Call originator: Extn:303. Reason: No answer
I have run a PCAP trace and NGREP on the Asterisk end and although registered it receives nothing from the bridge.
Can someone offer any assistance on what needs configuring on Asterisk (extensions.conf) to receive and make calls via the bridge.
Thanks in advance.