assigning CLID to analog

[brjone]

I have analog line that I want to dispaly a differnt number than actual number when calling out. When I try to change the CLID the order goes through like it works but the CLID goes back to origianl 0. Does not give me an error just defaults back to 0. Have CS1K 7.6.

 

[Firebird Scrambler]

Have you created a new CLID entry in LD 15 under NET?.

Use CLID in LD 21 to print them out.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[brjone]

I created new CLID in element manager, tested on VOIP phone and it worked. When I try to change to the new CLID entry in feature CLID-Entry for analog phone, in element manger it auto sets back to 0.

 

[Firebird Scrambler]

Have you tried changing it via the commanand line?


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[brjone]

nope. I dont know command line