asm8+

[endlesswinter]

Can I install a GATM8 and an ASM8+ on the same bus?

I know the GATM takes 1/2 a bus, and the ASM takes a 1/4 bus. I've just never added a trunk and station on the same bus.

 

[Khosher]

Don't believe to you can have trunks and stations on same the bus. I tried using a DSM16 and BRI module in the past with no luck.

Can't say definitively though.

 

[option11newby]

I believe you can only do this if the MBM is a combi module

NCSS, NCDS, NCTS

 

[biv343]

True. If you have a 4x16 card using buses 2 and 3, you can put additional GATM cards on offsets 1,2 and 3 of bus 2.

Can't mix and match different station cards and trunk cards on the same bus though.

 

[endlesswinter]

Thanks for the info!