ASM?

[silver987]

Does anyone know how to check an ASM to see if anything is attached to it? I know if you go into maintenance it just shows the ASM. I don't want to chase every port down, that could take awhile.

Wayne T

 

[curlycord]

There is no way to tell if an analog device is attached to an ASM or ATA via programming.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[silver987]

Thanks for the reply.

Wayne T

 

[norstarboy125]

There is only 8 ports to check out so shouldn't take to long.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[silver987]

Try 16, two ASM's

Wayne T

 

[curlycord]

It's not just 8 ports, it's hunting down the items and having to go to site as opposed to dialing in and getting the info like with digital.
You could spend a lot of time finding out what cable #'s go where so you can then verify the type of device. i.e. fax or cordless etc.






=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[silver987]

Thank you Brian, it's a large car dealership with many buildings, I just inherited it so I have no clue where to start. It's like unhook them all and see who complains. (ha ha)

Wayne T

 

[curlycord]

I am curlycord!!

Nyuk Nyuk Nyuk!




=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[silver987]

Sorry, don't know what I was thinking.

Wayne T

 

[exsmogger]

You're welcome!

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952