asdm not working on PIX515E

[haniis]

Hello,
I have PIX 515E and I configure it.
http server enable
http 192.168.11.11 255.255.255.255 inside
but when I connect using IE on xp

https://192.168.11.11

no thing appear just page can not be found.
this is the output of #show version
Cisco PIX Firewall Version 6.1(4)
Cisco PIX Device Manager Version 1.1(2)

Compiled on Tue 21-May-02 08:40 by morlee

pix up 3 days 1 hour

Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: ethernet0: address is 000b.fd19.93e3, irq 10
1: ethernet1: address is 000b.fd19.93e4, irq 11
2: ethernet2: address is 0002.b3b9.7309, irq 11

Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES: Disabled
Maximum Interfaces: 3
Cut-through Proxy: Enabled
Guards: Enabled
Websense: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
ISAKMP peers: Unlimited
so how to able run ASDM.

 

[unclerico]

I'm thinking that you need to update your OS to something more recent than 6.1(4) to use ASDM. PDM is more than likely what you're looking at using for an OS this old. Either that or get down and dirty with the CLI.

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)

 

[kmills]

haniis,
You need the PDM version 4.1 to work with Pix ver 6.1(4). Whenever you upgrade the Pix version, you also have to upgrade the PDM version.

Unclerico is correct, you need Pix version 7.0 or higher to use ASDM.

However, I have found PDM & ASDM to be equally easy to use.
-- Kmills

 

[haniis]

thanks,
But from where can I get Pix version 7.0 for free . I don't have a contract with local cisco partner

 

[unclerico]

Unfortunately you can't. You're going to need to contact Cisco to see if you can get SmartNet on your PIX, which at this point I doubt it since it is EOL.

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)