ASC EVOIP - after installing a new NAS system is not archiving on it !

[IPOpotamus]

Hello tipmasters

I am installing a new NAS to an ASC EVOIP system which had a NAS1 which is currently fulled up.
I added the new NAS as NAS2, disable an enable the archiving job, (cascading mode) and waited.
Days after, the NAS2 is empty, and the system keeps showing the error of “NAS1 is full”

Is it necessary to restart services or reboot server?
Could the files, in the case of a NAS replace, be moved from old NAS to new NAS, and that change would be seamless for finding recordings and play them back?

Thanks a Giga.

 

[whykap]

Wrong forum perhaps?

 

[IPOpotamus]

Could be wrong indeed.
But do not blame me…

ASC EVOIP is a call recorder, and there some few threads about it here in tek-tips, I have few documentation about it, i am attending it due to a contract with a Siemens PBX, both are German products.
Since there are not ASC nor Siemens sub forum, the most related was Cisco CUCM, since ASC also works in integration with cisco.

I am fetching info on german forums but “Sprechen Sie Deutsch?”

 

[ECartman]

Here's the siemens hipath forum

http://tek-tips.com/threadminder.cfm?pid=965