Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASBCE R10 with IPO500v2 vs IPOSE

Status
Not open for further replies.

BResource

Programmer
Apr 22, 2008
160
GB
Hello all,

I have two lab systems one a standalone IP500v2 and a standalone IPOSE both are on the latest patch.
I am trying to get an SBCE R10 latest patch to work with them to support remote workers (Workplace IX).

The IPOSE is working fine. I can connect via TLS and everything is great.

If I try and use the IP500 I get self-signed cert errors. I have setup everything the same, I have generated the certificates the same and uploaded the root-ca to the IPO500s certificate store. Just like I have done loads of times for older systems. If I try to use TCP instead of TLS nothing happens.
I can get the 46xxxsettings.txt file via https with no errors. Its just when I try and connect a user.

If I use an old SBCE on R7.2 the IP500 works just fine.

Is there something that has changed for the R10 SBCE?
Has anyone got a R10 SBCE with an IPO500?

Many thanks in advance.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top