Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASBCE Incident - error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number
- Thread starter dsm600rr
- Start date
So you have just only TLS 1.2 enabled in your TLS profile but some devices want to use TLS 1.0 or 1.1?
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
- Thread starter
- #3
TLS Profiles are all 1.2, devices are all J179's - just never seen that error before. Set up the ASBCE the same as all the previous however this one was a newer software version. Either way the error seemed to go away and remote J179's are working as intended. Perhaps it was an outside device trying to register not using TLS 1.2? If that was the case, I think I would of seen the error before.
ACSS / ACIS
Dcomm, LLC
ACSS / ACIS
Dcomm, LLC
You should have a look into a traceSBC capture with TLS enabled.
Another option is that the certificate version is not accepted for any reason.
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
Another option is that the certificate version is not accepted for any reason.
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
- Status