Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASBC only registers when the application is restarted

Status
Not open for further replies.
mwag

mwag

Systems Engineer
Feb 28, 2018
12
DE
Hello everyone,

I have a funny phenomenon.. My Avaya SBC (Portwell) only successfully registers with the SIP-Trunk provider when I restart the SBC application in "Device Management". Has anyone had this phenomenon and a solution?

Because the registration basically works, I would rule out a configuration problem. Version 8.1.2.0-31-19809 is used.

The message "IPCS Memory utilization exceeded more than max 90" also appears sporadically in the alarms.

Greetings,

Michael
 
Status
Not open for further replies.

Similar threads

T
  • Question
Avaya 2410 / 2420 model phone does not show caller ID and timer when call is put on hold
Replies
0
Views
171
TelecomDude22
T
wallot
  • Locked
  • Question
Show the ASBCE config from CLI
Replies
0
Views
98
wallot
wallot
Traveler74
  • Question
Finding the media gateway with a down status in the haystack
Replies
3
Views
354
Traveler74
Traveler74
abdou9
  • Locked
  • Question
one way audio when transfering calls to PSTN
Replies
1
Views
182
avayaguy23
avayaguy23
vnd19xx
  • Locked
  • Question
Backup the CM6 license
Replies
1
Views
255
kyle555
kyle555

Part and Inventory Search

Sponsor

Back
Top