ASA5505 tunnel remote vpn user through l2l

[Repcsike]

Hello Guys,

I wanted to implement a solution on two asa5505 routers, to let the remote cisco vpn client users connect to router one from the internet, then reach the other site behind the tunnel at the other router.

Tried working with the associated ACLs, but maybe the problem is that the connection from the remote users is already encrypted?

I have my site to site and remote vpn connections working on both routers:

lan 2 lan connection OK on both routers

remote vpn to the connected routers inside network is Ok on both routers


Theoretically what do I have to set on the routers to make available the other side of the l2l tunner for the remote vpn users? Can post the config if it's not working out, but first I would like to get a know-how .

Thanks!

 

[kwing112000]

You may have better luck in the ASA forum here..

http://www.tek-tips.com/threadminder.cfm?pid=1598

I remember reading something about this recently. you may want to search the forum to see.

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[drewdown]

You can do it, we do it here. Doesn't matter that the traffic is encrypted, once its on the LAN it should be fine to pass through the L2L tunnel.

Just make sure you have an ACL that allows the remote VPN Client networks access to the other side of the L2L tunnel.