ASA WebVPN issues with JDE

[xylax]

I am having a major issue with the webvpn configuration on my firewall. I have the following setup.

1. Webvpn with homepage set to a webpage with several links
2. One link being our JD edwards enterprise One system
3. Cisco Secure Desktop (not enabled at the time)
4. Cisco ASA software 8.0(3)

When I click on the JDE link, the page loads and I can log into the system. HOWEVER, when I attempt to click on any links within JDE or run any fast path, I get nothing but an 'Application Loading' Page. I've verified that it works without webvpn with a regular IE7 and 8 browser.

I tried Firefox 3.5.3 using the same process. Of course, JDE does not support that browser and a few links break once in it but it does load what applications I can see in the list.

I've seen others have the same problem in other forums but do not close the forum with their solution once they find out.

Shon
Network Administrator

 

[xylax]

Found the fix somewhere else:

OK

I figured out that the way I was creating the links within the web page were not the same as how links are created within Webvpn. In webvpn, links are created with javascripts that run a Cisco SSL relay program on the browser. Static href<http:// ,etc. Do not perform such scripting to run the SSL relay.

I added the links under webvpn rather a webpage and the Cisco relay came up to install.

I still have one problem though. I have two ASA's and the relay only works on the one ASA, (not the one that has 100 SSL licenses) So I'm curious as to why it is doing that...

Shon
Network Administrator