lanman1865
MIS
I have a site to site vpn tunnel between PIX and ASA. ASA is in data center(B). The pix is at a DR remote site.The core switch is a 3560 in (B) with static routes to our corporate data center(A), which is connected by a dedicated circuit(cisco 2600). The 3560 has a static route to the ASA for communication between the DR site and (B). I have communication between data center (B) and the DR site, but because of that static route the DR site has no communication to data center (A).
I'm not sure how to allow for communication to/from data center (B) to DR and allow from data center (B) to allow communication from the DR site to go to circuit to Data center (A).
I'm not sure how to allow for communication to/from data center (B) to DR and allow from data center (B) to allow communication from the DR site to go to circuit to Data center (A).