ASA Reports on a CM2.2 Platform 1

[definityhelp]

i want to pull a station report off of my CM2.2 platform which details all iP stations, ip addresses and MAC address, is it possible?

 

[4merAvaya]

The 'list registered' report will give you all but the MAC address. If you status the individual station (status station x), page 4 will give you the MAC address.

Kevin

 

[4merAvaya]

The 'list registered' report will give you all but the MAC address. If you status the individual station (status station x), page 4 will give you the MAC address.

Kevin

 

[definityhelp]

Thanks Kevin, understand this is there any way of getting the MAC address on a report as have over 1500 iP extensions

 

[wildcard100001]

definityhelp,

One way would be to run a status report on all stations...from one report. Here's how:
First extract all extensions in question, then using excel and notepad, format the extensions to the following format..

stat stat 1234;stat stat 1235;stat stat 1236;etc etc...
(this must be exact)

Highlight and copy this command string...

Then in ASA, on the file menu select "system", then "Advanced", then "report"

In the report window that comes up, CTRL V (paste the stat stat 1234;etc.. data) in the report window.

Then select export fields to file... save it to a location etc.. import the file to excel... comma delimited etc... then extract the MAC addresses from the report.

Kind of a pain... but it will work.

Thanks,

Wildcard

 

[m4ilm4n]

I use SNMPview to sweep my voice VLANs, and have it return IP, MAC, loaded firmware rev, etc.