phonequestion
IS-IT--Management
Is it possible - Can someone please help me with the steps to connect to a remote system using ASA and a CLAN card. The remote G3 has version 8 on it and Im not sure if it can be done.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASA and a CLAN card
- Thread starter phonequestion
- Start date
- Status
Not True...
Ip connectivity was introduced into release 7 but that was a bad load and it was not very sucessfull. Release 8 is fine and this works without trouble.
This only works if:
The C-LAN board is a TN799C
“change ip-services”. Now add in the connection to the C-LAN using a port say “7000”. The remote Node should say "any".
This will allow you to connect via telnet.
Ip connectivity was introduced into release 7 but that was a bad load and it was not very sucessfull. Release 8 is fine and this works without trouble.
This only works if:
The C-LAN board is a TN799C
“change ip-services”. Now add in the connection to the C-LAN using a port say “7000”. The remote Node should say "any".
This will allow you to connect via telnet.
- Status
Similar threads