I have three TN793B analog cards in my Prologix. Why is it when I add users or browse available ports I only see eight ports per card when using ASA. If I manually enter a new station using terminal emulator and assign it to a port higher than eight and then go back into ASA I see all 24 ports on all three cards whether they have stations assigned to them or not. I can also assign station to a port higher than 8 in ASA and it takes it, but when I browse the available stations it doesn't show all 24. Is there a command or patch out there somewhere that I don't know about?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASA - Add User 1
- Thread starter drayle
- Start date
-
1
- #2
Is that Avaya's ASA version 1.9?
If so there are many bugs in that software with missing entries.
The newer versions 1.10 and above correct this problem.
If it is a 1.11 then:
Avaya Site Administration 1.10.11 Patch Fix
The following patch file, (asa_1_10_11_p001.exe) is a patch fix for Avaya Site Administration version 1.10.11and should be applied only to this version of ASA to correct the following known issues:
1, The switch error dialog box that occurs as a result of a bulletin board message from the switch is preventing scheduled jobs from running.
NOTE: The bulletin board message fix only applies to the scheduler of ASA. You will still see the message when using Emulation or GEDI.
2, While running a list station report from the Advanced tab\Report, ASA fails with the error message: (Report (list Station type 2500) failed: 750 records have been searched.
3, When adding buttons on a 4624 IP station the text for the bottom right button is not displayed and does not print when clicking on the print label button on the button administration form.
4, While using the change user wizard to change a button feature ASA\DSA will not complete the change. ASA\DSA fails with the error: (the port specified is invalid)
FINAL NOTE: Be sure to shutdown ASA before installing the patchfix.
Go to
and download the patch fix for 1.11
If it is the older version, check with your Avaya Business Partner for a newer copy of the software.
Netcon1
(Mark if Useful!!)
If so there are many bugs in that software with missing entries.
The newer versions 1.10 and above correct this problem.
If it is a 1.11 then:
Avaya Site Administration 1.10.11 Patch Fix
The following patch file, (asa_1_10_11_p001.exe) is a patch fix for Avaya Site Administration version 1.10.11and should be applied only to this version of ASA to correct the following known issues:
1, The switch error dialog box that occurs as a result of a bulletin board message from the switch is preventing scheduled jobs from running.
NOTE: The bulletin board message fix only applies to the scheduler of ASA. You will still see the message when using Emulation or GEDI.
2, While running a list station report from the Advanced tab\Report, ASA fails with the error message: (Report (list Station type 2500) failed: 750 records have been searched.
3, When adding buttons on a 4624 IP station the text for the bottom right button is not displayed and does not print when clicking on the print label button on the button administration form.
4, While using the change user wizard to change a button feature ASA\DSA will not complete the change. ASA\DSA fails with the error: (the port specified is invalid)
FINAL NOTE: Be sure to shutdown ASA before installing the patchfix.
Go to
and download the patch fix for 1.11
If it is the older version, check with your Avaya Business Partner for a newer copy of the software.
Netcon1
(Mark if Useful!!)
- Status
Similar threads
- Locked
- Question
- Locked
- Question