Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASA Active/Active Configuration

Status
Not open for further replies.
GeekoDude

GeekoDude

IS-IT--Management
May 24, 2006
16
0
0
PH

Hi guys,

I have 3 isp's a,b and c. They are inter connected via layer 2 switch for redundancy.Below is the diagram;

isp isp isp
a b c
| | |
| | |
L2 Switch1 (connected L2 Switch2
to L2 switch1
and L2 switch2)
| | |
| | |
asa 5520 (1) connected to asa asa 5520 (2)
1 and 2

I will configure asa on active/active mode; Any suggestion guys? comments?
Any sample configurations that i can work with ?
Hope to hear from you..Thanks all


 
Status
Not open for further replies.

Similar threads

quazimotto
  • Locked
  • Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
42
quazimotto
quazimotto
Tariq Habaybeh
  • Locked
  • Question
Cisco 881WD-E-K9 router configuration
Replies
1
Views
54
burtsbees
burtsbees
steel_bender
  • Locked
  • Question
Allow HTTPS TCP Traffic through ASA5525
Replies
1
Views
82
Mogles49
Mogles49
chazzmanbm
  • Locked
  • Question
Cisco ASA 9.2 SSH Configuration
Replies
1
Views
62
iggsterman
iggsterman
darktriad
  • Locked
  • Question
Cisco ASA 9.4: Configuring NAT
Replies
0
Views
44
darktriad
darktriad

Part and Inventory Search

Sponsor

Back
Top