ASA 5510 VPN connect from inside

[zviw]

Hi:

I am responsible for an ASA 5510 that I am still learning to configure and manage. I need help with one item, unless it cannot be done.

The VPN was configured by someone else and works fine from the outside. I would love to be able to connect to the VPN from inside the network - this would allow me to train users much more easily.

Is this possible and how? Can it be done through the GUI? (I used to like command lines but am getting tired of them lately - too much thinking. :-( )

Thanks in advance.


Zvi

 

[burtsbees]

Not if it uses IP addresses from the same network as inside.

Burt

 

[zviw]

Inside network is using 192.168.1.x
VPN pool is using 172.25.25.x

Zvi