ASA 5510 Inside/Outside same IP segment

[tboneshep]

Is it possible to have the inside and outside interface assigned an IP address from the same IP segment? If so, how? I can add one IP to an interface from the segment, but I cannot add the other from the same network segment to the other interface.

 

[Supergrrover]

You can't do that but you can use the firewall in transparent mode -

http://www.cisco.com/en/US/products...s_configuration_example09186a008089f467.shtml

If you have 8.02 there are a lot of imporvements.

Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[tboneshep]

Thanks for the update, your response now makes sense.