ASA 5510 and remote access VPN

[CertifiedNut]

Hi, I have one of the new ASA 5510 units from Cisco which I'm trying to configure for remote access. I have used the configuration wizard and VPN Wizard which has enabled me to connect to the VPN across the internet, but i cannot see anything on the inboard LAN.

I cannot connect to anything or use remote agents like Remote desktop. I've previosuly always used PIX firewalls and this is my firsat time at using a ASA.

Any advice on what to do or where I've gone wrong would be appreciated. Some internet posts say not to use the wizards, are they that bad?

Thanks

Rich

 

[Supergrrover]

I stay away from the wizards only because I like to know exactly what's going on. I know several people who have used them and it worked fine.

Here is the guide that shows the ASDM and the CLI so you can double check what's been added.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml

Brent
Systems Engineer / Consultant
CCNP, CCSP