Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASA 5505 - 2 VLANs 1 WAN - Routing Internet Setup

Status
Not open for further replies.

thec0dy

IS-IT--Management
Apr 16, 2010
41
US
First off I am not a cisco guru. I am learning day by day.

I have Cisco ASA 5505. I have a comcast cable modem for internet. I have two interfaces setup.

Port Configurations

Ethernet 0/7 - VLAN9 - 192.10.10.X Network (192.10.10.1 255.255.255.0 Assigned)
Ethernet 0/6 - VLAN10 - 10.0.0.X Comcast Modem (10.0.0.2 255.255.255.0 Assigned)
Comcast Modem Gateway - 10.0.0.1

The 192.10.10.X network is our guest network. It hands out IPs to the user. DHCP is setup to give them the gateway of 192.10.10.1. Now what I am wanting to do is configure The 192.10.10.X network to use the internet connection which is gateway 10.0.0.1.

Is there an easy way of doing this? I feel like I am almost there.

Thank you.
 
Post a sh run

ip access-list extended IP-Options-and-Powerball
deny ip any any winning-powerball-ticket
permit ip any any option any-options
!
class-map ACL-Options-and-Powerball
match access-group name IP-Options-and-Powerball
!
policy-map CoPP-POLICY
class ACL-Options-and-Powerball
drop
!
control-plane
service-policy input CoPP-POLICY
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top