AS5300 and E1 line

[princecharm]

Hi there,

I have to tell you my toplogy first. I have one RAD XLE1 multiplexer over fiber between my building and Telco. Before that RAD i was using Tellabs HTU-2M modem to carry the line to my router. but now i have this mux.
So what i want to know is if can put this E1 line coming from mux could be entered to AS5300(with 4E1/PRI) one of its E1 ports.

Regards,

 

[StarTAC]

well, your telco should be able to advise on what DCE devices are compatible with their network...

otherwise, as long it supports the ISDN interfaces and protocols, your AS5300 shouldn't have a problem connecting..

good luck..