AS400 clients getting disconnected

[mot98]

Hi All,

We connect to an AS400 machine at our windsor location. Everything was working fine last week, and then they upgraded to a new server and transferred the data.

Now all of my RF clients are disconnecting after about 1/2 hour with the following error messages showing in the "qsysopr" log:

TCP/IP connection to remote system 192.XXX.XX.XX closed, reason code 2.

Or

TCP/IP connection to remote system 192.XXX.XX.XX closed, reason code 3.

I have tested my 802.11b network, and have succesfully ran a ping on the host to the server for over an hour...but the session still got disconnected during that time.

I am looking at the TCP/IP attributes on the server, but don't know what settings I need to change to stop this from happening.

Any help would be greatly appreciated.

Thanks,

Mike

mot98

"I'd rather be dead and cool..then alive and uncool."
---Harley Davidson & The Marlboro Man

 

[iSeriesCodePoet]

Are they using it during this time frame? Does everyone drop at once?

iSeriesCodePoet
iSeries Programmer/Lawson Software Administrator

http://www.koldark.net

See my progress to converting to linux.

http://linux.koldark.net

 

[mot98]

Thanks for the response.

The clients are dropping randomly, and in no specific order.

I have been searching the internet for any relevant info, but have not found anything yet.

I think there is a TCP/IP Setting that is causing them to time out, but I am not sure what to change on the server to stop this from happening.



mot98

"I'd rather be dead and cool..then alive and uncool."
---Harley Davidson & The Marlboro Man

 

[iSeriesCodePoet]

I am not sure it is the server. I am thinking it is either the network or the client.

iSeriesCodePoet
iSeries Programmer/Lawson Software Administrator

http://www.koldark.net

See my progress to converting to linux.

http://linux.koldark.net