ARS

[CarlosPrex]

I hope someone could help me ASAP.
The 800 LS has 4 CO Lines /2 FXS /1 Cellular/1 Paging Loudspeaker Port.

Pool 70 has the 4 CO Lines, Pool 890 has the 2 FXS and Pool 892 has the cell line. Everything is working fine, but I have to program this way: When dialing 9, calls must take Pool 70 except when dialing 044 and 833. Then must take Pool 892.

I´m confused with ARS Table, so I hope someone could offer some step by step support. THANK YOU VERY MUCH.

 

[Pepperz]

Not sure what you mean by a cellular line, but anyway: ARS is routing by different tables.
By default, the last table is used for local calls, and the second to last is used for toll calls. Both these are probably set to use pool 70 as the first route. You can override these tables by putting in a table before the default tables. Take Table 5, and set the ARS (Under options off the main menu) input entry 1 to 044, and entry 2 to 833. Specify the type of table based on the entries 044 and 833 being area codes or exchanges, set the Sub A pool to 892, and put in any extra digits, if necessary. ARS reads the tables top to bottom. If a match is found for the dialed number in table 5 it won't look for a match in any subsequent tables.

Pepperz@charter.net

 

[CarlosPrex]

Thank you. I really appreciate your support. But I guess Im doing something wrong or I didnt understand correctly. Every dialing string including 044 and 833 are using Pool 70 still.

By the way, the cellular line is a cell phone with one RJ-45 Port for connecting any T/R analog device. I connected it to port 808 (800LS) and is working fine in Pool 892.

Thats why I need to configure ARS in order to use the cell line when 044 or 833 is dialed.

 

[Pepperz]

Print out the ARS table, and see what the entry looks like for the new table you made.

Pepperz@charter.net

 

[CarlosPrex]

----- Site: MERCEDES BENZ. Captured: 09/03/04 -----
AUTOMATIC ROUTE SELECTION

ARS IS: ACTIVE ACCESS CODE: 9

TABLE 1: Area Code
01)044 02)833

Pool Absorb Other Digits FRL Call type Start Pattern
1)592- 00 ------------ 3 BOTH --:-- A

Pool Absorb Other Digits FRL Call type Start Pattern
1)---- -- ------------ - ----- --:-- B

May it be possible that you can give me a step by step procedure in order to fill correctly every field?

As I said before, everything is working correctly, all I need is to use the Pool 892 when a call is dialed by 044 or 833.
THANX

 

[Pepperz]

enter 892 in the pool, not 592.

Pepperz@charter.net

 

[CarlosPrex]

Pepperz
I apologize. From the beginning the Pools have been renumbered from 8xx to 5xx, so I submitted my first post saying 892 in order to not confuse anybody...I forgot to change the 592 to 892 in the ARS Print.

 

[TouchToneTommy]

How is 044 an area code or office code?

 

[CarlosPrex]

In México, in order to make local calls to cell phones, you must dial 044 ( 9 + 044 + local cell number)

 

[TouchToneTommy]

Your printout of Table 1 looks right, but perhaps the FRL of the telephones hs been lowered to 2 and not accessing that table?