ARS

[EngMajd1982]

Hi to All,,

I Have Installed two PRI Cards on Business Communication Manager CM450, each PRI has its own number.I would to Configure these Cards to use the same destination code access (eg.., 9)

For Example :
Majdi dials 9 to enter the first PRI Pilot number. ( 5503224)
Mohammad dials 9 to enter the second PRI pilot number. (5503222)

Thanks

 

[Firebird Scrambler]

I don't think it's possible, but you may have to break down the codes to e.g. 91 or 92 etc for each PRI link.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.