Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Array Expansion

Status
Not open for further replies.

JST2101

MIS
Nov 16, 2011
7
GB
Hi All,

I'm new to TekTips and I'm a little rusty with HP Management Suite so please bear with me if I'm missing any information.

A client of ours has a DL360-G5Smart Array P400iRAID Controller Firmware 2.103 x 146GB Drives in a RAID5 (Contaning Drives c:\, D:\ & E:\)

The client wishes to increase the amount of space available and I believe that this can be achieved by adding additional disks and then Expand Array/Expand Logical Drive.

Given the above information can you offer any advice as to whether I am correct or not?

One item I have noticed is references to Battery Backed Write Cache. How can I check if this is OK on my clients server?

Reading the HP spec indicates that the P400i has BBWC as standard but using the HP Management Suite > Storage > Array Controller Information shows Battery Status as "Not Present".

Am I looking in the right place.Any pointers/advice will be greatly appreciated.

Feel free to ask for more information if that helps with any replies.

Many thanks in advance.


Jason.
 
I replied to your other thread on this same topic. One assumption is that the server has room for the additional disk(s).


Light travels faster than sound. That's why some people appear bright until you hear them speak.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top