Array Controller

[Bhalchandra]

Dear Sir,

Pl. Suggest me the solution on following error getting in event viewr,
Event id:7026
Source Service Control Manager
Type: Error
Discription:
The follwoing error start or system start driver(s) failed to load
cpq32fs2.

Also Pl. Give the site which gives me the site for solution of event errors.

Thanx and Regds,
Bhalchnadra

 

[tin]

Hi

Check out this site:

http://www.compaq.com/support/techpubs/customer_advisories/

DO990915_CW01_0.html

I hope it will be helpful

 

[Sunny79]

The CPQ32FS2 refers to the SCSI controller driver not initializing. This is most likely just a regular embedded SCSI port on your server or a SCSI card not a array controller. What do you have connected on that port? More likely than not, that device has stopped responding. You can try reinstalling the COMPAQ SSD which is the smart start software again which inturn will reinstall the controller driver CPQ32FS2 and see if the issue is resolved. If not look into what is connected to the port and that device connected may be your problem.

Good luck.