Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Arp Table Question

Status
Not open for further replies.
jgolde00

jgolde00

IS-IT--Management
Oct 9, 2000
7
US
Cisco 4503
My management is on Vlan 1 and all of my interfaces are on Vlan 2.

Why when I do a show ip arp does it only show IP’s from Vlan 1 and not Vlan 2?
Is there a way to see the arp table of the other Vlan’s?

Thanks in advance.
 
Sort by date Sort by votes
If this a strict layer 2 box then you won't see any arp for vlan 2 . If it has a layer 3 card in it and routing is turned on you should see arp for vlan 2 . My guess this is layer 2 only which in this case you would have to look at the mac table and then go up to layer 3 router and correlate it to you arp table up there .
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Zero6
  • Locked
  • Question
question about cisco cbs 350-12xs 12 port 10g sfp+
Replies
0
Views
114
Zero6
Zero6
Delta5
  • Locked
  • Question
Cisco setting for automatic ip arp cache refresh
Replies
3
Views
299
iggsterman
iggsterman
Mogles49
  • Locked
  • Question
Firewall ACL question
Replies
1
Views
89
burtsbees
burtsbees
mkc1962
  • Locked
  • Question
Cisco 2602e connection question
Replies
0
Views
59
mkc1962
mkc1962
azrael2000
  • Locked
  • Question
quick question...re layer 3 with routing
Replies
1
Views
99
chieftan
chieftan

Part and Inventory Search

Sponsor

Back
Top