Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ARN password recover??? 1

Status
Not open for further replies.

anis

IS-IT--Management
Apr 26, 2001
1
TN
is ther any methode to recover arn password?
 
there is a jumper on the main board (sorry can't rember wich one) that can be pulled to reset the password to factory.
 
1.Power cycle the ARN.

2.When the ARN starts cycling through Power On Diags, type Ctrl C followed by a carriage return. This will put you in diagnostic mode and you will see the following prompt:

Diag_1>

3.At this prompt, type in the following command exactly:

d/l/n:5 410000 0

This sequence will blank out the Manager password in NVRAM.

4.Type boot or power cycle the ARN. There is no longer a Manager password.


Hope this helps....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top