Guys, we had an area code change from 616 to 269. Is there an easy way to change the prefixs to point to the new area code, or do I have to enter each one into the PBX? Also, what do I need to do for the sites that are in the old area code, we have two sites that are in the 616 area code.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Area code change?
- Thread starter shug1
- Start date
To check area codes in the Meridian go to LD90
REQ prt
CUST 0
FEAT net
TRAN ac1 (ac-1) is the access code
TYPE npa (area code)
NPA 1909 (1+area code)
RLI 6
SDRR NONE
ITEI NONE
To add a new area code:
REQ new
CUST 0
FEAT net
TRAN ac1
TYPE npa
NPA 1951
RLI 6
SDRR
ITEI
REQ prt
CUST 0
FEAT net
TRAN ac1 (ac-1) is the access code
TYPE npa (area code)
NPA 1909 (1+area code)
RLI 6
SDRR NONE
ITEI NONE
To add a new area code:
REQ new
CUST 0
FEAT net
TRAN ac1
TYPE npa
NPA 1951
RLI 6
SDRR
ITEI
Johnthephoneguy
Technical User
if your area code changed you might also have to go into your CLID table and change any info there you are sending out.
- Status
Similar threads
