-
1
- #1
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
arcserveit 1
- Thread starter caroline
- Start date
Just load the file "ARCSRV32.EXE" from the Arcserve server//arcserve.6 directory or where ever the software is installed on the server. The only thing is you need to make sure you are loading Btrieve on the work station you want to use otherwise you may not see some or all of your devices.<br>
Otherwise you can install the manager only from the install CD to the local workstation. Just be sure you have the license key for the CD.<br>
<br>
In both cases you'll need to make sure you have the necessary admin rights to use Arcserve. But I'm sure you already know that. I hope this helps. Good Luck.<br>
<br>
Dan
<br>
{just wandering by}
Otherwise you can install the manager only from the install CD to the local workstation. Just be sure you have the license key for the CD.<br>
<br>
In both cases you'll need to make sure you have the necessary admin rights to use Arcserve. But I'm sure you already know that. I hope this helps. Good Luck.<br>
<br>
Dan
<br>{just wandering by}
- Status
Similar threads
