Arcserve 6.6 keeps crashing our Arcserve Volume on our Cluster.
I have updated some nlms and it was more stable, but as soon as the tape drive starts an inventory of the DLT 120T it then crashes the server.
This has been happening for a few days now, I have run a nss rebuild numerous times on the server. I have checked all the error codes appearing in the log files, and they keep sating that it is a drive problem, I have replaced the DLT. I have tried new media, I have cleaned the drive. I downed the Cluster and unplugged the SCSI cables, and put them back together, it all looks fine, but then starts to crash.
As a last resort I may have to ditch the volume and rebuild it, then re-install Arcserve.
Can anyone help please.
Lloyd
I have updated some nlms and it was more stable, but as soon as the tape drive starts an inventory of the DLT 120T it then crashes the server.
This has been happening for a few days now, I have run a nss rebuild numerous times on the server. I have checked all the error codes appearing in the log files, and they keep sating that it is a drive problem, I have replaced the DLT. I have tried new media, I have cleaned the drive. I downed the Cluster and unplugged the SCSI cables, and put them back together, it all looks fine, but then starts to crash.
As a last resort I may have to ditch the volume and rebuild it, then re-install Arcserve.
Can anyone help please.
Lloyd
