Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Arcserve 9+problems with gfs media pool
- Thread starter pesavento
- Start date
davidmichel
Technical User
From someone I know who knows more about NetWare.
The problem here is the database stored the pool and the client overwrote it with a blank so the pools are gone. Providing he used the correct process to overwrite the database in the 1st place, I would suggest just making a new job with the old pool name and the pool will be recreated. The client assumed that the job would create the pools but the pools are created when the job is made. Then he can put the tapes into the pools after putting each tape into the drive at least once to inventory the tapes to they are in the database.
The problem here is the database stored the pool and the client overwrote it with a blank so the pools are gone. Providing he used the correct process to overwrite the database in the 1st place, I would suggest just making a new job with the old pool name and the pool will be recreated. The client assumed that the job would create the pools but the pools are created when the job is made. Then he can put the tapes into the pools after putting each tape into the drive at least once to inventory the tapes to they are in the database.
- Status
Similar threads
- Locked
- Question