Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Arcserve 7 for Netware Manager slow
- Thread starter oanding
- Start date
From the NW console (local or remote)enter
TAPESVR DISABLE WRITES
This effectivly disconnects the tape device allowing Arcserve to run at full speed. This will show if its a SCSI/tape drive problem or not.
Also try to archive part of a local drive on the server to
eliminate the network.
Have you run the "test tape" utility ?
Hope this helps
TAPESVR DISABLE WRITES
This effectivly disconnects the tape device allowing Arcserve to run at full speed. This will show if its a SCSI/tape drive problem or not.
Also try to archive part of a local drive on the server to
eliminate the network.
Have you run the "test tape" utility ?
Hope this helps
- Status
Similar threads
- Locked
- Question
- Locked
- Question