Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Apple IIC files
- Thread starter Milwauken
- Start date
Try to step up gradually if possible. You don't state what type of machine(s) you have at your disposal, so here is what I would do under varying situations.
A) Have a IIe at my disposal w/the version of Appleworks, import BSW files into Appleworks using ASCII (works with some formatting issues, used to do it in high school). Save to 3 1/2 floppy. Then import Appleworks file into Clarisworks 2.0 on a PowerPC, then import into Appleworks 6.2 and save as MS document.
B) Attempt to import documents directly into Appleworks 6.2 from BSW.
C) Print documents out and scan into new system.
Hope this helps.
A) Have a IIe at my disposal w/the version of Appleworks, import BSW files into Appleworks using ASCII (works with some formatting issues, used to do it in high school). Save to 3 1/2 floppy. Then import Appleworks file into Clarisworks 2.0 on a PowerPC, then import into Appleworks 6.2 and save as MS document.
B) Attempt to import documents directly into Appleworks 6.2 from BSW.
C) Print documents out and scan into new system.
Hope this helps.
- Status
