i have an ibm pc with an appian typhoon card. it has the single output with a splitter, and i'm using two NEC 2010x monotors. i set up the pc using two vga NEC's and everything was fine. but when i hooked up the two dvi monitors i didn't get any output. i enabled the onboard video then one of the dvi monitors came up, but i couldn't ever get the second one to come up. i'm wondering if this is an O.S. thing (i'm running XP) or a monitor thing.
i hooked up the other two vga monitors and they both came right up.
thanks in advance.
i hooked up the other two vga monitors and they both came right up.
thanks in advance.