Appearance of incoming CO on digital set?

[ScoTTeL]

Okay, I am a Lucent/Avaya guy so don't know Meridian stuff.

I need to punch in a regular CO line to a universal trunk card and then make its appearance on a digital set of my choosing. Or maybe a few digital sets.

Can you guys give me step by step instructions?

I do know basic administration, very basic.

 

[phonedude10]

You need to program a route in ld16 as private line route and then build the trunks in ld14 and assign a PRDN. The PRDN is what you will assign on a key of the tel set.

 

[acewarlock]

What kind of Switch is this, a Norstar or an Option 11-81

 

[ScoTTeL]

It is an option 51 and option 11 both.