Anyone hookup a Crown 135 MA to Partner ACS 308 paging port. 4

[telemarksman]

I sold customer used ACS 308 R1.1 stand alone processor. ( NO Backplane)
He has his own Crown 135 MA paging system, mixer amplifier.

Can this be hooked up to Partner? If so what output of crown would go into Paging port jack on 308?
He also wants to hook up MOH. Can they both be done thru the CROWN?
Or is one seperate from the other?

Also how do you setup a Caller ID log?

http://crownaudio.com/pdf/ca/140498.pdf

alwayslearning

 

[SYQUEST]

It may need an interface module depending on the amplifier input. You might want to download and read the documentation on the Partner ACS to become more familiar with the equipment and features. You can get it for free from support.avaya.com. Version R1.1 does NOT support CID! That was added in R2.0. MOH is covered in the documentation also...

....JIM....

 

[TouchToneTommy]

Here's the Crown pdf you actually want

http://www.crownaudio.com/pdf/ca/140497.pdf

Looks like you will need a matching transformer to connect the Partner's paging OUTPUT to the Crown's microphone INPUT. If you are using the amp to broadcast background music as well, use the Partner's contact closure to trigger the input.

If you are broadcasting background music, and want to use that as MOH, the Crown has a specific output to go to the Partner's MOH input as well.

Read the docs - it's not that complicated!!

 

[telemarksman]

Customer has no docs on the paging unit. He just moved his office and had Crown in a box,
I seem to have lost my large Partner manual with all my cheat sheets in it. I spent most of weekend looking for it, Gone

alwayslearning

 

[TouchToneTommy]

Are you unable to use Google?

The ACS Manual is here

http://support.avaya.com/css/Products/P0162/Administration & System Programming

I already gave you the technical practice for the amplifier above.

 

[telemarksman]

I talked to Crown Mfg. Company today. They said if the line out from Partner page port is balanced, I can go straight in to their input. If the output of Partner is 600 ohm I will need a transformer that matches (aligns) the input.
Anyone know the output spec of Partner paging port?
Thank you.

alwayslearning

 

[telemarksman]

TT I just spent the last 13 minutes on the link you provided. I cannot find what I am looking for. Maybe it is because I am not that computer savvy.
That is why I liked the book form manual I had. Can you send me the link to just the Partner Programming manual please? Thank you!

alwayslearning

 

[telemarksman]

touchtone tommy: 3rd time is a charm. I was able to open manual. I will print it tomorrow. I have not looked for paging specs yet though. Thanks

alwayslearning

 

[mforrence]

Partner page output is 600 ohm