Any way to have a BLF of 150 or so phones

[viper222]

I have a customer that wishes to have there receptionist who has a M3904 to see the status of 150ish telephones. I know I can put (2) 22 button add-on module for a total fo 44 but aside from placing more phones to support the additional BLF modules is there any other way. I have many free TN's if there is something that would work. Third party items would also be considered.

 

[dirkfuzzbucket]

Not an expert but wouldn't an operator console be better?

 

[viper222]

They want the operator to be able to "monitor" the extensions so she can verify they are busy like they are supposed to be AND be able to know at a glance who to transfer calls to.

 

[luv2ski]

fire the people who are not busy ..promote those that are

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[ArchTelecom]

luv2ski has the right solution....

 

[dirkfuzzbucket]

I guess the only way then is to have 3x3904's with 2x addon units (quite a bit of labelling)

Good Luck

 

[phonejack99]

No labling if you use the Display based vs the Key based add ons.

 

[StoneColdphoneman]

I did not know that the make add on for 3904’s so you don’t have to label key’s.
What is the part # for self labeling add on?

 

[unkalary]

use a 2250 console that has a busy lamp field. only problem is you have to dial the first digit to get a display