Any Panasonic IP PBX expert here ???? (Need TDE100 Installation Help) 1

[renjioptura]

Hi Friends,

I need to replace one old pbx system & install a new TDE100 in my office. Currently i have a 22 extension analogue pbx system. I'm planing to install one TDE100, 33 analogue SLT phones, 2 Digital PT phones, 2 DECT CS $ 2 Wireless phones.

I went through some Panasonic installation manuals and other guides. I'm planning to buy the following,

1. TDE100 System
2. KX-TDA0180 Analogue Trunk Card
3. KX-TDA0193 Caller ID Card
4. KX-TDA0143 Cell Station Interface
5. KX-TDA0172 Digital Extension Card
6. KX-TDA0174 SLT Extension 16port
7. KX-DT346 Digital Proprietary Phone (for reception)
8. KX-DT390 DSS Console (for reception)
9. KX-TCA175 Wireless Phone (for reception)
10.KX-TDA0155 Wireless Access point
11.KX-DT333 Digital Proprietary Phone (for GM room)
12.KX-TCA175 Wireless Phone
13.KX-TDA0155 Wireless Access point
14.KX-T2375 SLT Phones

Friends, Is materies are enough for my requirement?? Please suggest me if any thing i missed/want to del.

Appreciate your valuable comments..........

 

[obtsystems]

With only 2 dect cordless i think the 0141 2 channell dect cell station that connects to the digital extension card is enough, and you wont need the 0143 cell station interface card. it will give you 2 channels of voice on each cell and it only uses 1 digital extension port per cell.

don't forget the system needs a psu, the 100 takes the small or medium, I would use the medium one to cover anything in the future

 

[renjioptura]

Thank you for reply...

ok.. i will go with KX-T0141/151. Can you suggest me a good PS for this model ?
& Is this model support only 2.4Ghz Portable stations ?? what are differences between DECT.6 & 2.4Ghz wireless solutions?
Okay, i also go with medium PSU (TDA0104)
& One more thing do i need additional 16 port SLT expansion for supporting 32 Analogue SLT phones?

 

[renjioptura]

Can i use KX-TDA100D instead of TDE100 ? If i go with TDA100 & prev. configurations , do i need any other expansion cards ?
i think PSU is not required.?

 

[obtsystems]

you can, but the tde gives you basic AA and Voicemail on board (esvm) and has the ip intergration ability.

the tda is older tech, I personly would go for the tde.

the kxtca 175 uses 1.9 GHZ and is the only ones that work on the system properly.

you need 2 x 16 slt cards for 32 digital extensions. this system will only take 5 cards, 6 if you dont need a option card

 

[renjioptura]

Thnx alot bro, Finally i decided to go with following configuration as per ur suggestions, i need a final confirmation from an expert like you....
Shall i proceed???
(it will b my first experience to install a pbx system )

Hybrid EPABX System KX-TDE100 1
Power Supply Unit(M) KX-TDA0104 1
Analogue Trunk Card KX-TDA0180 1
Caller ID Card KX-TDA0193 1
Digital Extension Card KX-TDA0172 1
SLT Extension 16port KX-TDA0174 2
Proprietary Phone KX-DT346 1
DSS Console KX-DT390 1
Wireless Phone KX-TCA175 2
Wireless Access point KX-TDA0155 2
Proprietary Phone KX-DT343 1
SLT Telephones KX-T7703 33

 

[renjioptura]

Thnx alot bro, Finally i decided to go with following configuration as per ur suggestions, i need a final confirmation from an expert like you....
Shall i proceed???
(it will b my first experience to install a pbx system )

Hybrid EPABX System___KX-TDE100 (1no.)
Power Supply Unit(M)___KX-TDA0104 (1)
Analogue Trunk Card___KX-TDA0180 (1)
Caller ID Card___KX-TDA0193 (1)
Digital Extension Card___KX-TDA0172 (1)
SLT Extension 16port___KX-TDA0174 (2)
Proprietary Phone___KX-DT346 (1)
DSS Console___KX-DT390 (1)
Wireless Phone___KX-TCA175 (2)
Wireless Access point___KX-TDA0155 (2)
Proprietary Phone___KX-DT343 (1)
SLT Telephones___KX-T7703 (33)

 

[obtsystems]

That all looks good except you have 33 kxt7703 phones and only 32 slt ports

 

[renjioptura]

Yes, i thought i can take one SLT connection from TDA0172. is it possible ?

 

[renjioptura]

Bro,

Cell Station Interface Card (CSIF4)____________KX-TDA0143 (1)
DECT Cell Station_______________________________KX-TDA0156 (4)
DECT Portable Station___________________KX-TCA364 (7)
DECT Portable Station_____________________ KX-TCA175 (1)


In future can i add above configuration to my tde system, to cover my entire outdoor area ( 250 m X 80m )
i think need about 7 PS in factory area.. and 1 in store manager room.

 

[meanmofo]

Ask yourself do you need DECT of would you get away with analogue cordless handsets.
Get a DHLC card and utilise the functionality of that. You can parallel the reception cordless off the main reception phone