Answering Incoming Calls from LCOT Trunks 1

[lexer]

Hi

A customer have a KX-TDE100, The PBX has LCOT Trunks (LCOT16 card), trunks are programmed to ring on the digital telephone on the operator via DIL, trunks are programmed on the operator and other digital telephones as flexible Single-CO buttons, The customer wants that any digital telephone with trunks programmed as flexible Single-CO buttons can answer incoming calls just by pressing the flexible Single-CO buttons, The customer had before a KX-TD1232 PBX and could do it, when the incoming calls ringed on the operator, other users with digital telephones see their Single-CO buttons blinked and could answer calls just by pressing the Single-CO buttons.
Is it posible to make this on KX-TDE100? When incoming calls ringed on the operator the Single-CO buttons on other users don't blink and they cannot answer calls by pressing their Single-CO buttons.
Please any ideas?

 

[Rhiuz]

dear lexer,

you can use ICD group, sample group 601 = 100 (operator) ring imediately , 200 (secretary) no ring
DIL table you can input 601