Another RDC fail-to-connect

[Hfnet]

I can connect to my workplace via VPN. Until last week I was able to remote desktop. Now I can't.

I have replaced the BT 105 usb modem with a BT 205 router. I am using a switch to share 2 pc's. The router is dishing out dchp IP addresses ok, and I am fully online. I can log into the work's system but can no longer access my workstation.

Is there some silly setting I have missed?

 

[bcastner]

Port forward TCP 3389 to your NAT'ed IP address. Enable uPnP on the new router.

 

[Hfnet]

Done that, still no joy

Rule ID IF Name Rule Flavor Protocol Local IP From Local IP To
3325 ALL Virtual Server ANY 0.0.0.0 0.0.0.0

3389 ALL Virtual Server ANY 192.168.1.3 192.168.1.3

 

[Hfnet]

Sorry, didn't put the detail in: (This is the same for the 192.168.1.3 setting also, but with 192.168.1.3 as the local address from and to)

NAT Rule Information
Rule ID: 3325
Rule Flavor: Virtual Server
IF Name: ALL
Protocol: ANY
Local Address From: 0.0.0.0
Local Address To: 0.0.0.0
Global Address From: 0.0.0.0
Global Address To: 0.0.0.0
Destination Port From: 3389
Destination Port To: 3389
Local Port: 3389