Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Another CLID post

Status
Not open for further replies.

GZgidnick

Technical User
Jan 8, 2015
156
AU
3300. v7.1 PR2.
SIP Trunk.


I am trying to get the Trunk name to be displayed on the Extensions displays along with the ANI info.

Scenario 1.1: Ring Group
Display ANI/ISDN Calling Number Only Yes
Display ANI/DNIS/ISDN Calling/Called Number Yes
Results:
On the phone display the external calling number is displayed at the top twice and the Ring Group pilot just below that.
The external calling number is displayed on the primary line key

Scenario 1.2: Ring Group
Display ANI/ISDN Calling Number Only No
Display ANI/DNIS/ISDN Calling/Called Number Yes
Results:
On the phone display the Ring Group Pilot is displayed at the top and bottom (Here I would expect the see the Trunk Label on top)
The external calling number is displayed on the primary line key


Scenario 1.3: Call to a DN
Display ANI/ISDN Calling Number Only Yes
Display ANI/DNIS/ISDN Calling/Called Number Yes
Results:
On the phone display the external number is displayed at the top and at the bottom
The external calling number is displayed on the primary line key

Scenario 1.4: Call to a DN
Display ANI/ISDN Calling Number Only Yes
Display ANI/DNIS/ISDN Calling/Called Number Yes
Results:
On the display at the top is displayed (277 CALLING) and nothing at the bottom. 277 is the DN itself.(Here I would expect to see the Trunk Label on top at least)
The external calling number is displayed on the primary line key

Same CoS is used on Trunk, Ring Group and DN level:

Display
After Answer Display Time 10
Calling Name Display - Internal - ONS Yes
Calling Number Display - Internal - ONS Yes
Display ANI/DNIS/ISDN Calling/Called Number Yes
Display ANI/ISDN Calling Number Only No
Display Caller ID on multicall/keylines No
Display Caller ID On Multicall/Keylines Timer 5
Display Caller ID On Single Line Displays For Forwarded Calls No
Display Dialed Digits during Outgoing Calls Yes
Display DNIS/Called Number Before Digit Modification No
Display Held Call ID on Transfer No
Display Transfer Destination on Recall No
Hot Desk External User - Display Internal Calling ID No
Maintain Ringing Party During Recall No
Non-Prime Public Network Identity No
Originator's Display Update In Call Forwarding/Rerouting No
Suppress Delivery of Caller ID Display between Sets No
Suppress Delivery of Caller ID Display between Sets - Override No
Suppress Display Of Account Code Numbers No
Suppress Redial Display

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top