ANNOYING BEEP

[ERR5020]

I HAVE 6 SETS , 2 2616 AND 4 2008. THE 4 2008 HAVE APPEARANCES OF THE 2616 DNS STARTING AT KEY 1. WHEN THE 2616 PRIME IS CALLED THE 2008S HAVE A LOUD BEEP THAT DONT STOP.IVE TRIED SWAPPING SETS BUT THAT DONT WORK.IVE ALSO CHANGED THE DNS TO SCN, BUT THE PROBLEM MOVES TO THE NEXT 2008(OF THE 4).WHATS GOIN ON? IS IT MY RING GENERATOR STICKING? HELP!!!!!

 

[wdhb]

It's meant to beep to let you know that a calls there. Try making all the 2008 key appearances SCN key's. How will they know there's a call there or isn't that a requirement?

 

[ERR5020]

I UNDERSTAND WHY THE BEEP, BUT IT DONT STOP. IT CONTINUES TO BEEP AFTER THE CALL IS ANSWERED. I HAVE TO UNPLUG THE PHONE TO STOP IT. I CHANGED 2 OF THE SETS TO SCN AND THE PROBLEM THE NEXT SET.

 

[coniglio]

Can you post the TN of one of the beeping sets?

 

[ERR5020]

THIS IS THE SET THE PROBLEM STARTED AT, ALL IVE CHANGED IS THE SCN DNS FROM SCR. THE OTHER SETS ARE IDENTICAL EXCEPT FOR PRIME DN(KEY 0)


DES 111132
TN 052 0 07 01
TYPE 2008
CDEN 8D
CUST 0
FDN 3616
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 9
SCI 0
SSU 0001
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA NDD HFD
MWA AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDD
CFTD SFD DDV CNID CDCD
ICDA CDMD MCTD CLBD AUTU
GPUA DPUD DNDD CFXD ARHA FITA CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
DDGA NAMA
USRD ULAD RTDD PGND OCBD FLXD FTTU
RCO 0
HUNT 3616
LHK 0
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
DNDR 0
KEY 00 SCR 4202 0 MARP
01 SCN 3616 0
CPND
NAME MEDICAL RECORDS
XPLN 15
DISPLAY_FMT FIRST,LAST
02 SCN 29257 0
CPND
NAME MEDICAL RECORDS
XPLN 15
DISPLAY_FMT FIRST,LAST
03 SCN 29258 0
CPND
NAME MEDICAL RECORDS
XPLN 15
DISPLAY_FMT FIRST,LAST
04 SCN 29259 0
CPND
NAME MEDICAL RECORDS
XPLN 15
DISPLAY_FMT FIRST,LAST
05 SCN 3675 0
CPND
NAME TRANSCRIPTION
XPLN 13
DISPLAY_FMT FIRST,LAST
06 SCN 29279 0
CPND
NAME TRANSCRIPTIONS
XPLN 14
DISPLAY_FMT FIRST,LAST
07 TRN
THIS DIDNT START HAPPENING UNTIL JUST 1 WEEK AGO. I DONT KNOW WHAT CHANGED?

 

[McGruff753]

Try changing CLS ARHA to ARHD (Audible Reminder of Held Call. A is Allowed D is Denied.

 

[hawks]

FITA in the CLS will allow for the phone to beep during the ring cycle. Does the 2616 receive alot of calls? Because with that many lines set to SCR, well you get the picture.

 

[McGruff753]

If that doesn't work, another CLS to look at is FITA (Flexible Incoming Tones) FITD is the default.

 

[coniglio]

that's what I was going to say too. Your FITA in the CLS means that the standard buzz tone is replaced by an on/off buzz tone. Make that FITD and the problem should cease