Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Announcement
- Thread starter gwmyers
- Start date
Pretty simple process.
You'll have to enable the announcement board on the g450 first if it wasn't done yet. 'Change media-g x', goto page 2 and set v9 as "gateway annoucements", then 'enable ann Xv9'
Find an available extension, 'add annoucement xxxx', name the announcement, set as integrated, specify the announcement board, F3.
Recording is a separate process but not difficult. I can provide info on that as well.
You'll have to enable the announcement board on the g450 first if it wasn't done yet. 'Change media-g x', goto page 2 and set v9 as "gateway annoucements", then 'enable ann Xv9'
Find an available extension, 'add annoucement xxxx', name the announcement, set as integrated, specify the announcement board, F3.
Recording is a separate process but not difficult. I can provide info on that as well.
- Thread starter
- #3
Thank You for your reply
change media-gateway 1
go to page 2 and set v9 as "gateway announcements
find extension (3801)
add announcement 3801
Test
set as integrated
Test
specify announcement board ???
Recording
display system features
*22 Announcement Access Code
3801
1
Recording
#
change media-gateway 1
go to page 2 and set v9 as "gateway announcements
find extension (3801)
add announcement 3801
Test
set as integrated
Test
specify announcement board ???
Recording
display system features
*22 Announcement Access Code
3801
1
Recording
#
- Status
Similar threads
- Locked
- Question
- Locked
- Question