I have a CS1000E on RLS 5.5 that is using a Cassidian 911 System for on base 911 calls. I connected 2 Telco CAMA trunks to the CS1000 and programmed the Nortel as Cassidian wants. The issue I'm having is that the ANI Digits are coming over the trunks, I see it on a digit grabber. But it doesn't appear on the 2216, it's all 0's. I have MFR's programmed. Cassidian needs to see the digits on the phone to do an ALI dip. Any thoughts?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ANI digits using CAMA trunks on a CS1000E
- Thread starter scsc78
- Start date
Similar threads
- Locked
- Question