andypmicrograce
IS-IT--Management
Help
I need to install a 4 port board into a 0/32 it has one allready.
What do I do
Regards
ANdy
I need to install a 4 port board into a 0/32 it has one allready.
What do I do
Regards
ANdy
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Analogue trunk board
- Thread starter andypmicrograce
- Start date
- Status
Power down, the first card should be in slot 4. The second will be installed into slot 3. Power up.
Depending upon your software level will determine what line numbers you will be programming onto the phones themselves.
MRoberts
Depending upon your software level will determine what line numbers you will be programming onto the phones themselves.
MRoberts
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question