Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog Trunks go Busy with Called ID

Status
Not open for further replies.
AQAS

AQAS

Technical User
Sep 1, 2015
4
SA
I have Avaya IPO 500v2 R9.1 with 2 analog trunks installed at a site. The issue is that when calling from outside the organization the operator hear 1 ring, then the caller ID displayed after that the call disconnect and the two lines go to busy.

Anyone hv idea?
 
Sort by date Sort by votes
111_adprg6.jpg
 
Upvote 0 Downvote
My idea would be to open monitor, trace it and find out what the hell is going on.

Set the trunk to bothway?

Make sure the locale for your system is correct in Manager> system.
Something is screwy with the

Run Automatic Balance Impedance Match.

Turn ICLID off if you really need a result.

Two silk worms had a race. They ended up in a tie.
 
Upvote 0 Downvote
1st try to Isolate the lines from the system and test lines with a test set, then you will know if it's a provider issue or an issue with the IP Office
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Imran555
  • Locked
  • Question
Incoming caller ID with SIP server IP over SIP Trunks 1
Replies
1
Views
612
ipohead
ipohead
tetratech
  • Locked
  • Question
2 SIP trunks with 911 Dialing
Replies
4
Views
349
tetratech
tetratech
teletechman
  • Question
Workplace busy on hold
Replies
1
Views
147
Ekster
Ekster
sheldoom
  • Locked
  • Question
IP Dect R4 Goes Unplugged When Called
Replies
2
Views
324
sheldoom
sheldoom
TN94z
  • Question
IP Office 11.1.3.1 with IP Flex - Sending caller ID
Replies
7
Views
502
TN94z
TN94z

Part and Inventory Search

Sponsor

Back
Top