Analog Trunk

[Qamar177]

I want to configure an analog Trunk and want it's incoming calls to be dropped on DN 3417. I have selected AUTO :YES while configuring it's associated Route and selected ATDN:3417 in LD 14 while creating COT trunk.
Now I am calling on my Trunk but it's not ringing on 3417. What is possible reason ?

 

[Firebird Scrambler]

Have you changed the polarity to see if its a line reversal?

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.myfreesites.net

linkedin

 

[Qamar177]

Yes , I have changed polarity but problem still exists...

 

[Firebird Scrambler]

What wiring pair are you using?
What is the TN ?.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.myfreesites.net

linkedin

 

[Qamar177]

I have configured XUT at slot 11 of 11c and using TN 11 0 0 7. Last port of XUT.

 

[Geordie12567]

You should be connected to the 15th Pair Black/Slate right?

 

[Qamar177]

No it's Red/Green instead of black/slate.

 

[Geordie12567]

You need to miss a pair between each unit.

Unit 0 = White/Blu Blu/White
Unit 1 = White/Grn Grn/White
Unit 2 = White/Slt Slt/White
Unit 3 = Red/Org Org/Red
Unit 4 = Red/Brn Brn/Red
Unit 5 = Blk/Blu Blu/Blk
Unit 6 = Blk/Grn Grn Blk
Unit 7 = Blk/Slate Slate/Blk